ICEPLATE® Curve Plate Carrier Water Bladder (50oz. / 1500ml)
S-IcePlate-Curve-CY-L
- In stock
Optimize ICEPLATE® with:
ICEPLATE® Curve is 100% made in the USA from US materials
[ OVERVIEW ]
COOLING/HEATING WITH YOUR DRINKING WATER
Worn close to the body, ICEPLATE® Curve is a Medium ESAPI-shaped water bottle that cools/warms/hydrates you with 50 fl oz (1.5 L) of drinking water, delivering 70 watts of cooling power or 52 watts of heating power with hands-free plate carrier or backpack hydration for unparalleled control over your environment. Another way to think of ICEPLATE® Curve is like a booster rocket designed to put you into orbit with a full gas tank, not necessarily to last the entire mission. Engineered for elite users looking for every edge in the performance of their duties, ICEPLATE® Curve creates decisive competitive advantages where none previously existed by weaponizing temperature to enhance performance and survivability.
Source90 Drink Tubes (included) are cross-compatible with other bladders like those from CamelBak®.
Please Note: ICEPLATE® Curve should be used with a member of our IMS (ICEPLATE® MOLLE Sleeve) Collection:
IMS Pro Gen 3, IMS Versa Gen 3, and ICEPLATE® Backpack Gen 3. IMS accessories are strongly recommended for the optimal experience when running ICEPLATE® Curve with a plate carrier or vest. Each one is designed to meet specific needs, so you can choose the one that's right for you. For Sport and recreational use, we suggest our ICEPLATE® Backpack Gen 3 or ICEPLATE EXO®-SLK Gen 3. MOLLE Velcro Side Release Armor Straps are not included with ICEPLATE® Curve as they have been discontinued and permanently replaced by the IMS Versa Gen 3 Combo.
ICEPLATE® Curve Right Exit has been discontinued as part of our SKU Rationalization program. Click here for more details.
ICEPLATE Curve is compatible with the Crye Precision AVS 1000 pack as a replacement hydration bladder.
[ SPECIFICATIONS ]
[ WHAT'S INCLUDED ]
[ SELECT A 'CHASSIS' FOR ICEPLATE® CURVE ]
ICEPLATE® Curve is a powerful hydration, cooling and heating ‘Battery’. Freeze ICEPLATE® Curve for 70 watts of cooling power or fill with hot water for up to 52 watts of conductive heating power. ICEPLATE® Curve creates a performance-enhancement and environmental inoculation capability without rival.
The ICEPLATE® Curve ‘Battery’ needs a ‘Chassis’ to be used to its full potential. Whether you need cooling, heating, hydration, or a combination of the three, we have a wide selection of vests and backpack ‘Chassis’ that optimize ICEPLATE® Curve’s power.
Our primary users are divided into:
- MIL / LEO / Civilian
- SAFETY
- SPORT
Within these groups, we have solutions for a wide variety of activities. Our customers constantly find new uses for ICEPLATE® Curve as they experiment with fresh ways to remove environmental constraints from both work and leisure activities. With users ranging from frontline military, to Drive Thru workers, to wedding photographers, the only limitation is your creativity. Pair ICEPLATE® Curve with a Chassis that best fits your use case.
Anywhere you need hydration, cooling or heating, ICEPLATE® Curve boosts your performance.
For more information, see our article: How do I wear ICEPLATE®?
What is the ICEPLATE® Curve?
A premium hydration bladder, ICEPLATE® Curve is a medium ESAPI-shaped water reservoir that cools/warms/hydrates you with 50 fl oz (1.5 L) of drinking water delivering 70 watts of cooling power and 52 watts of heating power. The ICEPLATE® Curve comes paired with a premium drink tube with a high-flow bite valve allowing for optimal water flow and easy access to your drinking water.
Why Use ICEPLATE® Curve Over Other Water Bladders?
The ICEPLATE® Curve is truly a one-of-a-kind, revolutionary hydration reservoir. Some of the key features that set this water bladder apart from competitors are:
Versatility
Our ICEPLATE® Curve comes with a variety of "CHASSIS" options to tailor the product to your individual needs.
The primary users are divided into:
- Safety
- Sport
Within these groups, we have different sizes of hydration pack solutions to suit a wide variety of activities and end-users. The ICEPLATE® Curve is always finding new uses as our customers experiment with innovative ways to remove environmental constraints from both work and leisure activities. Anytime and anywhere you need hydration, cooling, or heating, the ICEPLATE® Curve will boost your performance. For more information on which hydration pack fits your needs, see our article: How do I wear ICEPLATE®?
Superior Design
Designed for optimal performance during any outdoor activity and in all climate conditions, our easy filling water storage bladder solution is the best choice on the market. When you fill the water bottle with cold drinking water and freeze it overnight, it uses ICEPLATE®'s revolutionary technology to cool your body down in hot weather. In turn, during cold weather months, the ICEPLATE® can be filled with warm or hot water and is then useful for heating your body rather than cooling it. We are also proud to boast we are a dishwasher-safe brand, allowing for an easy cleaning solution in between your outdoor adventures. With confidence, we can say ICEPLATE® is truly the best hydration bladder money can buy.
Durability
ICEPLATE® Curve has been engineered to weather the toughest of conditions. In the field, a burst water bladder can be a complete disaster. Avoid the worries of such a catastrophe getting in the way of a mission/objective with the superior design of the ICEPLATE® Curve.
[ VIDEOS ]
[ FEATURES ]
Cooling 
Fill and freeze ICEPLATE® Curve for a powerful 70 watts of cooling, creating a performance-enhancement and environmental inoculation capability without rival.
Heating
Fill ICEPLATE® Curve with hot water for up to 52 watts of conductive heating power and an incredible competitive advantage in even the harshest climates.
Hydration
ICEPLATE® Curve holds 50 fl oz (1.5 L) of water.
One-Way Valve
The one-way valve allows air into ICEPLATE® Curve, improving flow rate by more than 100% for an effortless drinking experience.
Multi-Curve Geometry
Conforms precisely to the geometry of the Medium ESAPI armor plate. This first of its kind architecture provides the most comfortable cooling/heating/hydration system ever conceived.
Easy to Fill + Maximized Water Use
A single recessed port at the lowest point of the bottle facilitates complete drainage and an effortless fill, each and every time. Proprietary TotalDrain Technology lets you finally drink all the water you are carrying, meaning no wasted weight.
Q-Hex Baffle System
Maintains ICEPLATE® Curve's structure during the freezing process, preserving low-profile geometry, and decreasing audible signature in the field.
Easy to Clean
Simple to clean - just pop it in the dishwasher or rinse with dish soap and hot water.
ICECAP
ICECAP QD Water Bottle Adapter allows ICEPLATE® Curve to be stored with or without a hose for maximum storage efficiency. Universal Quick Disconnect interface integrates seamlessly with most military and civilian drink tubes (Source, Camelbak), allowing ICEPLATE® Curve to go from freezer to field in seconds. Click here for Drink Tube Compatibility Chart. Instantly converts a Dasani water bottle into a backup, field-expedient hydration bladder.
Optimized
Optimized for ICEPLATE EXO® compatibility.
Fill Line
Permanent Fill Line is molded into ICEPLATE Curve and gives the water room to expand as it freezes.
Versatile
ICEPLATE® Curve can be worn outside any MOLLE equipped plate carrier using an IMS Combo or attached inside or outside a plate carrier using an IMS Pro Combo. Click here to learn about the difference between IMS and IMS Pro.
Purpose-Built
ICEPLATE® Curve fits inside any Medium ESAPI-compatible plate carrier (1” profile) by itself for training/physical fitness workouts like The Tactical Games, Crossfit, Memorial Day Murph, etc. Click here for all the ways to carry ICEPLATE® Curve
[ SPECIFICATIONS* ]
- Dimensions (Imperial): 9.5" x 12.5" x 1" [WxHxD]
- Dimensions (Metric): 24.13 cm x 31.75 cm x 2.54 cm [WxHxD]
- Source 90 Drink Tube length: 34" or 86 cm
- Capacity: 50 fl oz (1.5 L)
-
Cooling Duration*: Lasts 2-4 hours (after freezing overnight for 6-8 hours, actual results will vary based on external variables: solar exposure, ambient temp, external heat sources (i.e. engines), relative humidity, size/frame of user, metabolic capacity, work load).
-
Heating Duration*: Lasts 3-5 hours filled with hot water not to exceed 150 F (temperature based on personal preference/safety and outside temperature).
- Weight**: ~ 14 oz. empty, 66.2 oz. filled. / 0.86 Ibs empty, 4.12 Ibs filled. (50 fl oz. of water = 3.26 Ibs)
- Made of BPA-free, FDA Approved, Dishwasher Safe HDPE (High-density polyethylene)
- Made in USA from US Materials
- Patented
- ***DISCLAIMER: ICEPLATE® Curve is NOT body armor and is not to be used inside of plate bags in lieu of ballistic armor.***
[ RESOURCES ]
IceAge Insights
- How do I wear ICEPLATE®?
- ICEPLATE® Curve Instructions
- How much does ICEPLATE weigh when full?
- Does ICEPLATE Curve condensate or sweat when frozen?
- ICEPLATE FAQ: a deep dive into the design and engineering of ICEPLATE Curve
- Custom Colored ICEPLATE® Curve: How to Spray Paint your ICEPLATE®
- What side ICEPLATE® Curve Exit Port is right for me?
- What Carriers or Sleeves do you have that hold ICEPLATEs?
- ICEPLATE Classic vs. ICEPLATE Curve: What is the difference?
- Where can I get an additional Standalone ICEPLATE® Curve without a drink tube?
- Still have another technical question not covered here? Check out our IceAge Insights blog here where we probably have an article and/or video that will answer your question because someone else probably had it too.
The science behind ICEPLATE® Curve comes from more than two decades of research conducted by Stanford University, the US Army, USASOC, and the CDC on the effects of cooling on metabolic capacity, recovery, and heat injury prevention under PPE/MOPP and in athletics. If you'd like to read the full origin story of Qore Performance and how the ICEPLATE® was born, click here.
Videos
SOURCE Helix™ Valve
SOURCE Storm™ Valve
Important Notes
Designed and manufactured in the USA from US materials. Fulfilled from our Knoxville, TN HQ. Not subject to ITAR. Patented.
For bulk Corporate/Unit/Agency orders of 100+ units or to request a quote, please click here.
FAQs
Definitely! ICEPLATE® Curve can seamlessly integrate into a variety of backpacks, both as an internal and external component. For everyday carry and tactical uses, we suggest using packs from Vertx and Haley Strategic Partners. You will appreciate the reduction in bulk and the elimination of the typical "water bottle bulge."
Explore various backpack models compatible with ICEPLATE® here.
Maintaining your ICEPLATE® is straightforward due to its dishwasher-safe design. Simply remove the cap (which fits perfectly in the utensil basket) and place ICEPLATE® upside down in the bottom rack of your dishwasher. Run it through a standard wash and dry cycle.
Alternatively, you can wash it by hand. Just soak it in warm, soapy water and gently scrub the surface with a soft sponge. Make sure to rinse the bite valve thoroughly before use.
For detailed cleaning instructions, visit this article.
The drinking tube of your ICEPLATE® is also designed to be dishwasher safe, allowing for easy cleaning alongside your ICEPLATE®. If you prefer, it can be hand washed using the same method described for ICEPLATE®.
If you notice condensation build-up (especially before storing the tube long-term) consider using the Platypus Tube Brush for thorough cleaning.
More details on tube care can be found in this article, along with this helpful video.
While it's possible to use other liquids, we recommend sticking with water for optimal performance and ease of cleaning.
To completely dry your ICEPLATE®, hang it by securing a rubber band through the top strap loop. Place the rubber band through the opposite strap loop of the exit port to maximize drainage, thanks to our TotalDrain Technology.
For drying the tube, similar hanging methods are advised. Use a tube brush if you encounter stubborn condensation inside.
Yes, the ICEPLATE® boasts a quiet design due to its solid construction, making it ideal for various situations where noise reduction is crucial.
Discover the technology behind its quiet design here.
It's best to empty and dry your ICEPLATE® after each use, as water can become stale within 24 hours under certain conditions. Freezing ICEPLATE® extends the storage duration significantly.
Each ICEPLATE® model, including the Curve, holds over 50 fluid ounces (about 1.5 liters). It offers 70 watts of cooling power and can be filled with hot water to provide 52 watts of heating power, enhancing comfort in various climates.
When fully frozen, the ICEPLATE® provides several hours of cooling and sustains hydration for an 8-hour shift, although individual experiences can vary based on several factors like metabolic efficiency, size, and environmental conditions.
Yes, the ICEPLATE® is designed to produce condensation that cools the outer layer of your clothing and evaporates to keep you cool and dry. For optimal performance, pair it with moisture-wicking or hydrophobic garments.
ICEPLATE® can be worn either on the front or back. For first-time users, we recommend trying it on the back. For more information on positioning, read our blog post: How to wear ICEPLATE®.
For varied armor setups, here are some options:
- Soft Body Armor: Use our Velcro Armor Straps for optimal height adjustment.
- Hard Armor/Plate Carrier: Attach the ICEPLATE® using various items like Zipties, spare boot laces, or 550 cord. It fits well inside plate bags with their armor plate (depending on the armor type).
- External Armor Carry: Our IMS is the ideal solution for durable, low-profile hydration for military and law enforcement.
- Industrial/Commercial: Consider our ICEVEST® HiVis Safety Vest for a comprehensive safety solution integrating cooling, heating, and visibility features.
When filled, ICEPLATE® Curve weighs approximately 4.01 pounds, combining its lightweight design with the weight of 1.5 liters of water.
ICEPLATE® is built to withstand rigorous use. To see it in action, check out our durability test videos here.
You may also like
Q
The ridiculous hike in price makes this the last ice plate I will be purchasing. About $80 for a water bladder is not very affordable.
Hi Qunicy,
Thank you for taking the time to leave an honest review of your ICEPLATE® Curve experience. We are sorry to hear that you feel ICEPLATE® Curve is not very affordable, but we thought some additional information might be helpful context:
1. We've actually been able to DROP the price of ICEPLATE® Curve drinkable down to $75 from over $100 where it was in 2023 - still 100% Made in USA.
2. ICEPLATE® Curve itself is actually just $50. The Source90 Drink Tube is the other $25 and is completely optional. Our ICECAP is compatible with just about any drink tube on the market today for exactly this reason: user-choice. Details:
https://www.qoreperformance.com/products/source-90?_pos=1&_sid=ad152d88b&_ss=r
3. ICEPLATE® Curve is far more than a water bladder - it is a 24/7/365, all-environments, all-season heat-injury prevention tool that weaponizes temperature to enhance performance and survivability in the field. To date, ICEPLATE® Curve has roughly 7,000,000 hours worked in the field without a single minute lost to a heat injury since commercial launch in 2017. No water bladder on the planet can match this performance track record. Given that a hospitalization for heat stroke, rhabdo, or similar costs well over $40,000 in 2025, ICEPLATE® Curve is a bargain at ten times the price...
We hope this helps, but please let us know if you have any additional questions.
#StayFrosty
Qore Performance Customer Support Team
B
Good product keeps me warm outdoors shooting also some what hydrated not enough water also the valve I belive on top of the product so you can get suction to the water will be lost extremely easy I lost it 3 times the only reason I knew was becaaue water was coming down my back I had to put tape to not lose it . Other thing would be the nickel and dime other then that it’s a good product
G
Instagram Handle: hesselgh
Was beyond excited when the plates arrived, excellent build quality however they were much larger than I was expecting, they don't fit into my vests standard plate pockets so I'm slightly disappointed, nothing a modification or two cant fix, but just annoying.
Otherwise used them a few times already and happy to report in +45°C weather they last around 2-3hours (frozen) and +4hours with the water still ice cold.
Hi Hessel,
We're glad to hear that you're happy with the build quality and performance of your ICEPLATE® Curve in extreme temperatures. Regarding fit, the exact measurements of ICEPLATE® Curve are provided on the product page in the Specifications section under Dimensions. Also noted on the product page, ICEPLATE® Curve is designed to be used with an IMS (ICEPLATE® MOLLE Sleeve) when using ICEPLATE® Curve with a plate carrier or vest. It is not meant to fit inside of a plate bag. The IMS Collection can be viewed here:
https://www.qoreperformance.com/blogs/military-insights/what-is-the-difference-between-ims-and-ims-pro-iceplate-molle-sleeve-vs-iceplate-molle-sleeve-pro
We hope this helps, but please let us know if you have any additional questions.
#StayFrosty
Qore Performance Customer Support Team
N
I searched the internet for a way to keep me from over heating while going on my Summer runs in Phoenix. I decided to order one plate to give it a test run, was not disappointed. I was not thrilled about the idea of running with my plate carrier on, but it seems no one cares and my health is of the utmost importance. I have since bought another plate to keep my even cooler. I've recommended these plates to my friends, as I believe in this product.
C
fits in my plate carrier well. would recommend to anyone who wants a hydration pack/freezer pack for their plate carrier.
Quick note for context: for the best ICEPLATE®/plate carrier experience, we highly recommend using one of our ICEPLATE® MOLLE Sleeves (IMS) to mount ICEPLATE® to your plate carrier since it is not armor and should only go inside of your plate bag for fitness training, or airsoft/sim:
https://www.qoreperformance.com/collections/molle-sleeves
We hope this helps, but please let us know if you have any additional questions.
#StayFrosty
Qore Performance Customer Support Team
R
Overall a solid piece of kit to have. Currently running it through its paces in a JPC for combat training in 115°F heat. My only complaint would be the hose connection. Have had multiple training exercises where the hose becomes disconnected from the 90° elbow that quick connects to the plate. This then empties all the water in the plate being that it's at the bottom. Fixed by zip tying the hose to elbow connector but a bit of an oversight for a product that costs $100+. Only reason I had to give it 4 instead of 5 stars.
G
Instagram Handle: Potus
It’s good, does exactly what I want it to do, it just doesn’t need to cost as much as it does…
Hi Gilles,
Thank you for leaving an honest account of your ICEPLATE® Curve experience from Australia! We are glad to hear it delivers for you! You are 100% spot on that American-made products are unfathomably expensive in your country, Australia. However, those outrageous costs are well beyond our control. The reason for the high cost of our products (well, all US-made products) in your country is because of 1) Geography and 2) the taxes/duties imposed on imports by the Australian government. Here is a link to an article from the Business section of our INSIGHTS blog with details on those high taxes/duties imposed on imports by your government:
https://www.qoreperformance.com/blogs/running-the-business/why-are-american-made-products-so-expensive-abroad-europe-australia-etc-how-international-shipping-tariffs-customs-duties-and-vat-work?_pos=1&_psq=why-expensive-ab&_ss=e&_v=1.0
We hope this helps, but please let us know if you have any additional questions.
#StayFrosty
Qore Performance Customer Support Team
K
I love the idea but leaks with the cord and with the plug. Had to put tape around so it doesn’t leak. Works great have to replace the tape every week.
S
Got it because it fits the zip up back panel for the Scarab LT size S/M
B
Instagram Handle: @emsprovider
As a shooter and a medical provider, I felt that this would be a great addition to my daily kit. I was NOT mistaken. Absolutely love the iceplate purely as a supplemental hydration kit as I have not yet actually froze one. I now have 2 units for my 2 different carriers and HIGHLY recommend for anyone.
Reviews in Other Languages
W
The rigid canteen that fits in a plate carrier is awesome and it works. The drink tube that came with it didn't work, but they replaced it quickly and for free with a tube that rocks. Their stuff is only compatible with a few things: none of my Blackhawk-Hydrastorm and only one of my Camelbacks. The straps are kinda useless: still figuring out how to mount the canteen to various rigs.
C
Best solution for hydration in the field, military, Airsoft, civilian!!!!
