[ OVERVIEW ]
ICEPLATE EXO® Gen 3 + DFNDR RF1 Elite: The Best of the Best
Combining ICEPLATE EXO® Gen 3 with the DFNDR Armor RF1 Elite hard armor plates creates the best plate carrier package on the market today. Full stop. This is the best of the best.IMPORTANT UPDATE JUNE 27, 2024: Recently, a close US Ally contacted us about making modifications to ICEPLATE EXO® Gen 3 to meet the requirements of a newly issued plate carrier contract for their military. They specifically requested we make these changes in the MultiCam colorway. We were already working on these changes and modifications for a future version of ICEPLATE EXO® Gen 3, but this contract requirement accelerated our implementation of these modifications. In line with our belief in empowered individuals, we are making these modifications to ICEPLATE EXO® Gen 3 in MultiCam effective immediately and available to all, ensuring that you can get your hands on the latest version without delay.
Updates are as follows:
1. Shoulder strap width reduced to 1.5" for compatibility with 1.5” don/doff hardware (sold separately, First Spear Tubes shown for demonstration only).
2. Additional vertical SwiftClip slits create two different mounting heights for placards/QASM buckle accessories.
3. Additional negative MAPS row for Admin/EUD mounting optionality.
4. Internal Open Architecture Shoulder Straps for incredible “lay flat” shoulder strap angle of attack and comfort.
5. Standard MAPS spacing for upper portion of rear plate bag and half-spacing for lower portion of rear plate bag for precision pouch placement.
6. Vertically oriented lateral MOLLE slits for dedicated cummerbund routing.
"WHICH VARIANT SHOULD I BUY?": This will depend on your use case.
Side Strap - Buy this if you want the slimmest, lightest, faster variant or if you want to use a different cummerbund.
AXL Equinox Cummerbund - Buy this if you want a turn-key, out of the box load-bearing cummerbund with adjustability and quick-release capability.
If you have any further questions about ICEPLATE EXO® Gen 3, check out our FAQ here.
ICEPLATE EXO® Gen 3 is not for beginners or hobbyists. You can buy ICEPLATE EXO® Gen 3 as a complete package, but we also sell individual components separately here. Please note that ICEPLATE EXO® Gen 3 does not have an FR rating.
Plate Carrier Cooling/Heating/Hydration: add IMS Pro Combo above
Exposed Armor Plates: good or bad? Here is the scientific and engineering truth behind exposed armor plates
IMPORTANT: click here for terms, conditions, and restrictions on body armor purchases.
For safety reasons, all armor sales are final. No returns or exchanges. No exceptions.
DFNDR Armor Plates
The ICEPLATE EXO® Gen 3 DFNDR RF1 Elite is our premiere armor package for the discerning individual who requires the very best.The DFNDR Armor® RF1 Elite is the latest breakthrough in armor technology, revolutionizing the market with its cutting-edge features enabling ultra lightweight and incredibly thin armor for this level of ballistic protection. This plate offers unparalleled performance and durability. Its advanced technology ensures optimal stability and protection, making it the ultimate choice for those seeking the best armor system in the industry.
The DFNDR RF1 Elite defeats 7.62x51mm M80 Ball, 7.62x39mm Chinese Mild Steel Core and Russian PS Ball.
We created this ICEPLATE EXO® Gen 3 Armor Package to make things easy. Each package includes one Shooter Cut RF1 Elite plate and one SAPI Cut RF1 Elite plate. This combination optimizes arm mobility with the Shooter Cut in the front plate bag and maximizes coverage with the SAPI Cut in the rear plate bag.DFNDR Armor RF1 Elite rifle rated hard armor plates are independently tested to NIJ Protocol 0101.07. Designed with a multi-curve profile to provide an ergonomic, incredibly lightweight and comfortable fitting armor system that is intended to wear against your body all day (and conforms perfectly with ICEPLATE® Curve). An ultralight 2.09 ibs / 33.44 oz per plate to reduce fatigue, DFNDR RF1 Elite Rifle Rated Body Armor is equipped with a state of the art Trauma Mitigation Base to minimize the energy of an impact dramatically.
DFNDR Armor® is engineered with the highest grade of ballistic materials; Fiber-Lite Laminate, an ultra-high molecular weight polyethylene (UHMWPE) bound with a resin matrix to make it a hard stand-alone armor system and equipped with Spall-Tek to further reduce spall and deflection of projectile fragments. These RF1 Elite hard armor plates fit perfectly inside ICEPLATE EXO® Gen 3.
- Proudly Made in the USA
- Multi-Hit Protection
- 0.75 Inches Thick
- Stand-Alone System
- Weight:
- Level III+ C 3.1 pounds per armor plate
- Level IV 5.8 pounds per armor plate
- RF1 Elite 2.09 pounds per armor plate
- Dimensions: 9.5" x 12.5" x 0.75"
Side SAPI Armor Plates
The AXL Equinox Cummerbund option is compatible with SAPI side armor plates. We recommend using the DFNDR QRC 6x6 Side Plate Pouch Set.
Sizing, Armor Plate Compatibility
ICEPLATE EXO® Gen 3 is optimized to work with ICEPLATE Curve® for conformal fit with a Medium ESAPI plate profile. Armor plates with the following dimensions will fit:- 9.5" x 12.5" up to 1.1" for Medium ESAPI armor plate profiles.
- 10" x 12" up to 0.75" thick for Medium SAPI plate profiles.
Kit
To learn more about the difference between Level III+ C, Level IV and RF1 Elite hard armor plates, click here to go to our IceAge Insights article with full video. For best results, we strongly recommend running the DFNDR Armor Medium Level III+ C Stand-Alone Rifle Rated Hard Plates, the DFNDR Armor Medium Level IV Stand-Alone Rifle Rated Hard Plates or the DFNDR Armor RF1 Elite Stand-Alone Rifle Rated hard plates with ICEPLATE EXO® Gen 3 and ICEPLATE® Curve with an ICEPLATE® MOLLE Sleeve Pro, as ICEPLATE EXO® Gen 3 is optimally designed to fit Medium ESAPI armor plate profiles.Laser-cut slits measuring approximately 7.5" on center for compatibility with SwiftClip or G-Hook equipped placards.
[ SPECIFICATIONS ]
Weight: | 15.2 ounces (plate bags, Shoulder Shrouds, Side Strap) to 23.2 oz (AXL Equinox Cummerbund) |
Size: | Medium |
Attachment Mechanisms: | MOLLE, Velcro, SwiftClip, G-Hook |
Armor Plate Compatibility: |
Medium ESAPI (9.5” x 12.5” x 1.1”) Medium SAPI (10" x 12" x 0.75") |
Materials: | ICEPLATE EXO ® laminate, Velcro®, Nylon 12, Shock Cord, 500D Nylon outer (IRR compliant) |
[ WHAT'S INCLUDED]
SIDE STRAP
2 x Tri-Fold Shoulder Shrouds
1 x SAPI Cut DFNDR RF1 Armor Plate
AXL EQUINOX CUMMERBUND
2 x Tri-Fold Shoulder Shrouds
2 x AXL Equinox Retainers
2 x AXL Wedges
1 x 25" length of 3/8" Shock Cord
2 x Extra Cummerbund Pull Strings
1 x SAPI Cut DFNDR RF1 Armor Plate
[ VIDEOS ]
[ TURBOCHARGERS ]
ICEPLATE® Curve
THIN BUT CURVY
- Cooling - Fill and freeze ICEPLATE® Curve for up to 70 watts of conductive cooling per ICEPLATE® Curve - an unrivaled performance edge.
- Heating - Fill ICEPLATE® Curve with hot water for up to 52 watts of conductive heating power per ICEPLATE® Curve and an incredible competitive advantage in even the harshest climates.
- Hydration - Each ICEPLATE® Curve holds 50 fl oz (1.5 L) of water.
- One-Way Valve - The one-way valve allows air into ICEPLATE® Curve (drinkable option only), improving flow rate by more than 100% for an effortless drinking experience.
- Integration - Each plate bag is designed to accept ICEPLATE Curves or Medium ESAPI profile armor plates. When using armor plates with ICEPLATE EXO® Gen 3, add IMS Pro Combo for internal or external mounting of ICEPLATE® Curve.
ICEVENTS®
LESS IS MORE
- Convection - Stand-off, omnidirectional ventilation facilitates Convection (evaporative cooling).
- Hydrolysis Resistance - Will not absorb/retain water, sweat.
- Anti-microbial - Totally permanent, ICEVENTS® are antimicrobial at the molecular level, meaning the characteristic cannot be washed away.
-
Integration - ICEVENTS® Aero Ventilated Shoulder Pads evenly distribute load across your shoulders, reducing unnecessary strain. ICEVENTS® Classic Ventilation Pontoons (one pair included) provide stand-off ventilation between your body and your plate bag. Use one pair per plate bag as desired.
Above: ICEPLATE EXO® Gen 3 shown with internally mounted IMS Pro Combo for plate carrier cooling/heating/hydration.
[ FEATURES ]
Optimizing Your ICEPLATE EXO® DFNDR RF1 Elite Armor Package Setup
Elevate your ICEPLATE EXO® DFNDR RF1 Elite Armor Package plate carrier setup with our tailored offerings, ensuring your plate carrier is equipped for peak performance.
The IMS Pro Combo
The IMS Pro Combo is a game-changer, seamlessly integrating with your plate carrier to provide unmatched cooling, heating, and hydration capabilities using our groundbreaking ICEPLATE® Curve. This innovative plate carrier hydration pack is designed to maximize the functionality of your rifle plate carrier.
Optimizing Your ICEPLATE EXO® DFNDR RF1 Elite Armor Package Setup
You can also equip your armor package with Blue Force Gear Pouches, offering superior utility and quick access to magazines, enhancing your readiness and operational efficiency. These mag pouches are designed to complement the high demands of active shooter scenarios and intense training sessions, ensuring you have everything you need right at your fingertips.
ICEVENTS® Inner Belt
For those long days in the field or during intense training, the ICEVENTS® Inner Belt introduces an additional layer of ventilation to your plate carrier setup. This feature is crucial for maintaining comfort and reducing the risk of overheating, especially when wearing body armor plates like the DFNDR rifle plates that come with our RF1 Elite armor package. The ICEVENTS® Inner Belt is a testament to our commitment to not just ballistic protection, but also maximum comfort for the wearer, ensuring that your focus can remain on the mission at hand.
The Qore Performance Advantage
At Qore Performance, we are unwavering in our mission to redefine the standards of personal protection and performance. Our dedication to innovation is evident in every product we create, and the ICEPLATE EXO® DFNDR RF1 Elite Armor Package is no exception. Designed for the elite, our body armor solutions are a testament to our commitment to Building A Superhuman Future®, where every individual equipped with our gear is prepared to face challenges head-on and be the greatest version of themselves.
Our customers are at the heart of everything we do. That is why we did not compromise in offering DFNDR plates that meet the highest NIJ Standards for RF1 Elite protection against rifle rounds. This ensures our products provide maximum protection against ballistic threats without compromising on mobility or comfort – perfect for use by law enforcement officers and military personnel.
Proudly made in the USA, our products embody the spirit of innovation and excellence. When you choose Qore Performance, you're aligning with a brand that prioritizes your protection, comfort, and performance above all else.
[ RESOURCES ]
IceAge Insights
- How do I wear ICEPLATE®?
- Can Armor Plates Be Exposed to The Elements?
- What armor plates should I buy: Level III+ C, Level IV or RF1 Elite?
- What size plate carrier do I wear?
- What gear pouches/accessories go with ICEPLATE EXO®?
- The Science Behind Body Armor Cooling
- Weight Vest Training with Cooling (i.e. The Tactical Games, Crossfit Games)
For bulk Corporate/Unit/Agency orders of 100+ units or to request a quote, please click here.
FAQs
Setting up your plate carrier largely depends on personal preference and operational requirements. The setup can vary based on the type of mission, the gear required, and personal comfort. For guidance on optimizing your setup for specific scenarios, such as minimalistic or home defense configurations, visit our comprehensive guides on plate carrier setup, minimalist plate carrier setup, and home defense plate carrier setup.
NIJ Level III+ plates are classified as hard armor. They are specifically engineered to stop rifle rounds, which are significantly more powerful than handgun rounds typically addressed by soft armor. Level III hard armor plates provide essential protection to vital organs by deflecting high-velocity ballistic threats that soft armor cannot.
DFNDR Armor Level III+ C plates are constructed from Fiber-Lite Laminate combined with ultra-high molecular weight polyethylene (UHMWPE), bound by a resin matrix. This composition results in a hard, stand-alone armor system that includes Spall-Tek to mitigate spall and deflection of projectile fragments. These materials ensure that the armor not only offers superior ballistic protection but also remains lightweight and durable.
To maintain the integrity and performance of your armor plates and plate carrier, store them in a dry, cool environment out of direct sunlight. Regularly inspect for any signs of damage or wear. Clean the carrier as per manufacturer instructions, avoiding harsh chemicals that could degrade the materials. For the plates, a damp cloth can be used for cleaning. Always follow the specific care guidelines provided with ICEPLATE EXO® Gen 3 to ensure maximum longevity and protection.
In the United States, it is legal for all law-abiding civilians to purchase and own body armor. You have the right to protect yourself and your family. Keep in mind, certain states, like California and Illinois, have proposed legislation to restrict civilian ownership, though these measures have not been enacted. Body armor owners need to stay informed about local state laws to ensure compliance. Always check the latest legal requirements in your jurisdiction before purchasing body armor.
ICEPLATE EXO® Gen 3 brings significant enhancements for improved wearability and functionality.
The shoulder straps are now crafted with a single layer of EXO Laminate, reducing stiffness and incorporating quick-release features. The front plate bag has been redesigned with less material and more strategic Velcro® placements for better fit and usability, fully compatible with EUD/ATAC systems. The rear plate bag has expanded compatibility with MOLLE accessories, and the plate closure flap features a new lock-up system that conforms better to plate curvature. Finally, the quick-release cummerbund now includes AXL Equinox technology for increased structural rigidity and ease of use.
For more information on the upgrades, scroll up to learn more!
Absolutely! ICEPLATE EXO® Gen 3 is perfect for prepared civilians looking for exceptional personal protection with the best plate carrier on the market.
ICEPLATE EXO® Gen 3 weighs 15.2 ounces dry. When you add the AXL Equinox Cummerbund, it increases to just 23.2 ounces, maintaining a lower weight profile compared to other popular plate carriers.
The majority of users will find the Medium size optimal. Your front plate should align with your Sternal Angle and be centered along your mid-clavicular line. Position the top of your back plate roughly an inch or two vertebrae below your Vertebra prominens and the bottom one to three inches above your navel.
This varies slightly based on individual height and torso length. For more detailed guidance, check out this article.
Yes, ICEPLATE EXO® Gen 3 features both front and rear plate bags suitable for plates or ICEPLATE®s. You can attach up to three IMS Pro Combos on ICEPLATE EXO® Gen 3: one on the body-facing side of the front plate bag, one on the body-facing side of the rear plate bag, and one on the world-facing side of the rear plate bag. For extreme conditions, it’s possible to equip the front plate bag with IMS Pro as well.
For additional configurations, check out this article.
Over 80% of our customers use a Medium size, which offers the best fit due to the curvature of the ESAPI plates, enhancing body contour compatibility.
Level III plates typically offer ample protection for civilians, law enforcement, and some military personnel against most threats. However, Level IV plates provide an extra layer of protection where necessary.
For a detailed breakdown of plate levels, check out this article.
The choice between a plate carrier and a chest rig depends on specific needs, conditions, required gear, and personal preferences.
For a comprehensive comparison, check out this article.
Yes, most armor plates are designed to endure exposure to the elements.
For more information, check out this article.
Part of the beauty of ICEPLATE EXO® Gen 3’s design is that it will keep you cooler than traditional plate carriers.
For maximum cooling, using an ICEPLATE® Curve in both front and rear plate bags is recommended, which can actually make you cooler than wearing no plate carrier at all!
Yes! ICEPLATE EXO® Gen 3 is compatible with Shooter/Swimmer Cut plates.
Absolutely! ICEPLATE EXO® Gen 3 accommodates 10x12 SAPI plates, although adding extra Velcro to the bottom plate retention flap may be necessary for plates thicker than 0.35 inches.
ICEPLATE EXO® Gen 3 is exceptionally suited for maritime operations due to its lightweight, quick-release, and water-shedding capabilities.
With our ICEPLATE EXO®-CRH Adapter Kit, you can fully transform your ICEPLATE EXO® Gen 3 into an ICEPLATE EXO®-CRH setup!
All IMS variants work well with ICEPLATE EXO® Gen 3, but the IMS Pro is specifically optimized for use with ICEPLATE EXO® Gen 3, offering maximum performance.
We actually recommend it! You can equip IMS Pro on both the front and rear configurations of ICEPLATE EXO® Gen 3 for ultimate versatility of your plate carrier setup.
For recommendations on accessory combinations and setup strategies with ICEPLATE EXO® Gen 3, check out this article.
Certainly! ICEPLATE EXO® Gen 3 can be effectively paired with just ICEPLATE® for these fitness applications.
For additional setup ideas, check out this article on fitness uses of ICEPLATE EXO®!