IMS Pro Gen 3

Not gonna state more than necessary, but it simply works. It simply attaches, and holds. I haven’t seen it have too much play and wobble, personally. And even if it does, it’ll be a quick fix I’m sure.

I have it mounted on a CATAMARAN Gen. 3, and it works fine.

Perfect for the job, it’s good for practically anything. I run two of the sleeves with an ice plate pair on my BFG plate carrier. They also fit well with my Trex Arms AC1. I mainly use it for Airsoft milsims, the range, and other “tactical” oriented things. It’s so useful and versatile. Thank you Qore performance!

Great for long weighted walks/runs in the Miami heat, lasted around 2-3 hours but the cold water to drink helps immensely.

Can't wait to use it in the National Guard so I don't have to suffer from the humidity and sun, I'd recommend it to my peers so they too don't have to suffer and increase our sustainability.

This is one of the most exciting things I've added to my plate carrier. I use it whenever I can, wherever I can, which is about every day. The fact that I can be a hydration tool and be a hard shell bladder makes everything even better. This goes beyond versatility when it comes to hydration. I've tried camelbacks and water bottles and all these other things that don't do it or quite as well perform as this. This is one of the most unique and top-of-the-line products for anybody running a plate carrier. You can freeze it, you can heat it, and you can use it as a hydration tool. I've tested it while working in a scorching and humid climate, and it performed well! Freezing it gives you freezing water that stays cold. This has to be one of my favorite products because I don't have to carry around a water bottle.
Either I'm at the range, or I'm training in my weighted vest. This is the way I stay hydrated.
Everything seems to work out pretty well with putting it on my plate carrier and assembling it all. It wasn't that much of a hassle. It just takes a little time, but the quality and the care that Qoreperformance puts into the products is 100%! Recommend to anybody who stands in the armed watches or security detail. One of my favorite features is I have an IMS Pro mounted on the front and the back of my plate carrier, and with my nonfiring hand, I can one-handedly switch from the back to the front hydration Ice plates. This is a very unique and handy design. I haven't had any issues that were very drastic with it. So far, the Ice plates are in place. I just had my ice cap have a little drip drop recently. However, I am still working with the team to see if this is a problem on my end or their end. Anything could happen with any product, so of course, I couldn't be mad because the team responded so quickly, and we're already addressing to figure out the issue of the leak. Besides that minor hiccup, everything has been 100% with this product, and I have two. I would repurchase it!

I have had the Ice Plate for some time, but always put it inside my Plate Carrier. I finally decided to grab the sleeve and give it a try. Whole new ball game. So much cooler having it next to the skin. The plate carrier usually has some padding to make it more comfortable. But having the sleeve right there is way better. And it’s way easier to load after you have refrozen it. My plate carrier is a bother to open and revelcro each time. This is a game changer.

Couldn't even tell what made this a seconds but it fits nicely between my K19 and AMAP pack. Install was a breeze with the one wrap. I originally had my iceplate curve in the AMAP since it fits perfectly in there and the pack has the access panels at the top left and right for running the hydration tube up and over my PC. I bought the molle sleeve pro in order to have options. I might put the iceplate back in the amap and should I need to ditch the carrier the pack would already have a hydration source in it. If I need to ditch the AMAP it would be easy to remove the iceplate and slide right into the molle sleeve pro and go.

The product is great. It fits my medium size plate carrier and doesn’t add unnecessary bulk that compromise mobility. The only reason I give it 4 stars is the following: 1- The ice cap safety shims are not as reliable. As a law enforcement officer, I am constantly getting in and out of my patrol vehicle and this causes the shims to move back releasing the locking system. 2-The cold plate sweats too much and my uniform/gear end up soaked. Not a big deal considering the benefits of the product. I am very happy with it and totally recommend it to everyone!

I do security and bounty hunting, I wear this inside of my plate carrier and it fits great and keeps me cool for many hours while im directly in the sun, and allows me to keep more of a low profile with its slim shape.

Very good product, high quality and very quick shipping.

I used my Iceplate for the first time at Average Joes Super Rad Range Day and it sure did deliver great results! Quite honestly it only lasted in the TX heat from about 8am-12pm, which was expected, so I'll be ordering another to keep in a cooler to wear after lunch. Overall great quality that I can't believe I didn't think of first 😜 will definitely be buying more from Qore.

I have used the IMS Combo on a couple of activities and it is my goto hydration platform for both hiking and tactical weapons training. This summer I put this product to the test on the shooting range in the muggy Texas heat as well as a 26 mile hike and camping trip at Eagle Rock Loop in Arkansas. The molle webbing flawlessly attached to my 5.11 TACTEC Plate Carrier and also on my Eberlestock G1 Little Brother backpack. I had to use a couple of additional molle quick sticks on the G1, but my set up is simple and the ICE Plate is compatible with the Sawyer Squeeze water filtration system. Super quick to fill and hydration is always seconds away. I would highly recommend this to anyone who uses a plate carrier or wants to expand its use to a hiking application.

Semplici nel utilizzo, ottimi materiali e ben curati nelle finiture, utilizzati appena arrivati e sono veramente soddisfatto ( montati dietro ai sedili della mia Jeep )

It is exactly as advertised. The hard plastic hydration carrier allows for a slim system that is not hindered by backpacks or sitting. I ordered the IcePlate Curve with the standard MOLLE sleeve. All parts from the stitching to the plastic are top quality. One important note: carefully consider which side you want the hydration tube on. The tube is overly long in my opinion at about 36 inches in length. I would prefer it to be on my left side so the tube does not interfere with shouldering a rifle and therefore I ordered the IcePlate with the Left Side hydration hose exit port. Unfortunately, the 36" hose causes the hose to hang down far below my plate carrier if just on my left side. If I wrap it over the top of the IcePlate to hang down the right side, it is the perfect length, but again, I don't want it on my right side. I have not had the courage to attempt to force apart the fittings on the end and cut the hose to the desired length as they don't seem to be intended to be disconnected from the hose. For now I am running it on the right side but if I could do it over again, I would order the opposite side so the excess length would not interfere. If you are a larger individual or have a longer torso, the basic length may be perfect for you, but for me it loses 1 star for excess length. That aside, it is an excellent product overall.

First off, I am not an operator. Just a nobody who wants to be prepared with some Larping on the side. Qore performance has impressed me over the past few purchases. The ice plate sleeve was a great addition to my ice plate with my LV119. Easy to install on any molle backing. Also easily removable. The biggest thing I like about this is if you don't need the Ice Plate you can remove it and the sleeve is flat and not noticeable. For anyone in Hot Temperatures, this would be a great add-on that is reasonably priced. With a few swappable Ice Plates, you can stay cooler longer and beat the heat!