(standard on all Drinkable IcePlate® Curves)
|Year Round Cooling and Warming||Fill and freeze IcePlate® Curve for an unparalleled 70 Watts of Cooling Power per plate, keeping your core body temperature where you want it for hours. As the ice melts, you will have ice cold water to drink. Fill with hot water and enjoy 52 watts of conductive heating power.|
|Multi-Curve Geometry||Conforms precisely to the geometry of the Medium ESAPI armor plate. This first of its kind architecture provides the most comfortable cooling/heating/hydration system ever conceived.|
|Easy to Fill + Maximized Water Use||A single recessed port at the lowest point of the bottle facilitates complete drainage and an effortless fill, each and every time. Proprietary TotalDrain Technology lets you finally drink all the water you are carrying, meaning no wasted weight.|
|Q-Hex Baffle System||Maintains IcePlate® Curve's structure during the freezing process, preserving low-profile geometry, and decreasing audible signature in the field.|
|IceCap||IceCap QD Water Bottle Adapter allows IcePlate® Curve to be stored with or without a hose for maximum storage efficiency. Universal Quick Disconnect interface integrates seamlessly with most military and civilian drink tubes (Source, Camelbak), allowing IcePlate® Curve to go from freezer to field in seconds. Click here for Drink Tube Compatibility Chart. Instantly converts and Dasani water bottle into a backup, field-expedient hydration bladder.|
|Easy to Integrate||Side Release Armor Straps ensure IcePlate® Curve fits with any plate carrier in the world between your combat shirt and plate carrier. For users who want to run IcePlate® Curve in their plate bag, the exact fit will depend on the specific plate carrier/armor combo. Integrate with IcePlate EXO® for unparalleled performance.|
|Easy to Clean||Simple to clean - just pop it in the dishwasher or rinse with dish soap and hot water.|
- Dimensions (Imperial): 9.5" x 12.5" x 1" [WxHxD]
- Dimensions (Metric): 24.13 cm x 31.75 cm x 2.54 cm [WxHxD]
- Source 90 Drink Tube length: 34" or 86 cm
- Weight: ~ 12 oz.
- Capacity: 50 fl oz (1.5 L)
- Cooling Duration: Lasts 2-4 hours (after freezing overnight for 6-8 hours, actual results will vary based on external variables: solar exposure, ambient temp, external heat sources (i.e. engines), relative humidity, size/frame of user, metabolic capacity, work load)
- Heating Duration: Lasts 3-5 hours filled with hot water between 150-190 F (temperature based on personal preference/safety and outside temperature)
- BPA-free, FDA Approved, Dishwasher Safe HDPE
- Multiple US and International Patents Pending
- Made in USA from US Materials
Designed and manufactured in the USA from US materials. Fulfilled from our Sterling, VA HQ. Not subject to ITAR. US and International Patents Pending.
For bulk Corporate/Unit/Agency orders of 100+ units or to request a quote, please click here.
For anyone who works in kit and has to be ready at a moments notice this is an absolute necessity
This is revolutionary. It takes hydration to a new level. They are more secure and far better than traditional bladders. Their customer service is great as well. I highly recommend this to anyone looking for an option easier way to hydrate.
Where were you guys when I soldiered back in the 80s and 90s
Great product. I bought 2 ice plates and mollie sleeve carrier. So much better on the plate carrier than the others.
When to fill the 2nd one and found out it had a hole on the top. I haven’t sent an email yet but will when I get a chance.
It's good. I donno what you need to hear, but this is a good product. It's though and putting in hot or frozen water is all It's cracked up to be. It's not the easiest to attached to kit compared to say a bladder and it's only 1.5 litters but if you accept that, it's gucci. I've bought two and I'd buy again.
Thank you so much for taking the time to share an honest account of your experience with IcePlate Curve. We are stoked to hear that it is delivering for you! We felt it could be helpful to share a couple of links with you to address your attachment challenges. While the Side Release Armor Straps are simple and accessible, our IMS and IMS Pro sleeves are infinitely easier to use and provide far more scalability to help you get the most out of your IcePlate Curve with nearly zero effort. Here is a link to all of the options for IMS and IMS Pro and at the top. you'll see a hyperlinked graphic that can tell you all about the differences between the two options to help you select the IMS variant that is best for you:
We hope that helps, but please don't hesitate to let us know if you have any questions. #StayFrosty
Had an issue with a leak. Qore reached out right away and sent me a new one FAST. Wish all companies had this level of service.
I purchased a couple of ice plates and vest. I am thoroughly satisfied with the quality of the products and customer service!
IcePlate Curve Standalone
This is my second ice plate first one is ranger Green this one is Wolf Gray
I absolutely love them I've combined them with 511s all missions carrier to wear it under my clothes when I'm running or at work it works in my plate carrier but with the 5096 carrier it gives me a little extra coolant power anybody recommend a good harness it for it
I work/work out in the mojove, this attaches with extreme ease on a plate carrier or backpack. For day use and running, I freeze it completely. Way better than a camelbak for this purpose, plus I can use the same hose that came with the camelbak as well. This is an amazing product and just wish I would have found out about it sooner.