IMS Versa Combo (IcePlate® MOLLE Sleeve Pro uniquement)
B-SleeveCombo-Versa-MC-L
Optimisez avec :
IMS Versa Gen 3 is 100% manufactured in-house at our Knoxville, TN HQ from US materials
[ APERÇU ]
Plate Carrier hydratation et thermorégulation des gilets pare-balles pour les professionnels d'élite dans des environnements austères et sans faille.
L'association d'IMS Pro (IcePlate MOLLE Sleeve Pro) avec IcePlate® Curve (vendu séparément) est un changement de jeu d'hydratation et de refroidissement/chauffage du gilet pare-balles. Faisant avancer notre vision pour la construction d'un avenir surhumain, IMS Pro exploite toute la puissance de l'eau que vous transportez : gel pour le refroidissement, eau chaude pour le chauffage, hydratation tout climat. Porté à l'intérieur ou à l'extérieur de votre porte-plaque, IcePlate MOLLE Sleeve Pro se fixe solidement à votre porte-plaque en utilisant n'importe quelle combinaison de MOLLE et/ou Velcro Hook ou Loop. IcePlate MOLLE Sleeve Pro est doté d'un MOLLE découpé au laser sur les deux faces en plus d'une bande à crochets de marque Velcro sur une face et d'une bande à boucles de marque Velcro sur l'autre face pour une compatibilité universelle avec tout support de plaque MOLLE et/ou champ de crochet ou de boucle. L'échange de courbes IcePlate est basé sur notre concept "Hydration Magazine" et est aussi simple que cela puisse paraître.
Remarque : ce produit est destiné aux propriétaires existants d' IcePlate® Curve et à ceux qui souhaitent mélanger et assortir les couleurs IcePlate® / Source 90 Drink Hose / IMS Pro. Pour une solution d'hydratation de support de plaque clé en main avec refroidissement/chauffage du gilet pare-balles, consultez IMS Pro Combo .
[ VIDÉOS ]
[ CARACTÉRISTIQUES ]
Capable
IMS Pro est construit à partir de notre stratifié IcePlate EXO® pour une intégration transparente et un look professionnel
Ambidextre
Appartement
La géométrie de conception conforme avec IcePlate® Curve offre le système de refroidissement/chauffage/hydratation du support de plaque le plus plat, le plus solide et le plus performant jamais construit
Simplifié
Ultraléger
IMS Pro est 30 % plus léger qu'IMS et ne pèse que 4,2 onces. Cartes négatives découpées au laser (points de fixation MOLLE construits en supprimant et non en ajoutant du matériel)
Optimisé
Optimisé pour la compatibilité IcePlate EXO®
Universel
Fonctionne avec n'importe quel support de plaque avec un champ MOLLE 6x4 et/ou un champ Velcro à boucles et crochets
Modulaire
Les cartes à double face vous permettent de transporter votre eau et de préserver votre champ MOLLE
Construit à cet effet
Accepte les plaques d'armure IcePlate Curve® ou Medium ESAPI de manière interchangeable pour vous offrir une polyvalence maximale pour vos besoins de refroidissement, de chauffage, d'hydratation et de protection
Compatibilité Zip-On
Compatible avec les panneaux Crye Precision Zip On pour JPC 2.0 et AVS
Ventilé
Les MAP découpées au laser à double face servent également d'orifices de ventilation
Fiable
La fermeture à glissière inférieure est sortie, la fermeture Velcro inférieure est avec le champ Hook Velcro à l'intérieur de la manche IcePlate® pour éviter tout contact avec les vêtements ou les uniformes
[ RESSOURCES ]
Pour les commandes groupées d'entreprise/d'unité/d'agence de plus de 100 unités ou pour demander un devis, veuillez cliquer ici .
D
Instagram Handle: diego.soriano05
Great for long weighted walks/runs in the Miami heat, lasted around 2-3 hours but the cold water to drink helps immensely.
Can't wait to use it in the National Guard so I don't have to suffer from the humidity and sun, I'd recommend it to my peers so they too don't have to suffer and increase our sustainability.
D
As the title says, this is more than universal. The mounting solutions they include allow you the ability to put it ANYWHERE.
J
Instagram Handle: myguncatalog
The only thing that I wasn’t a fan of is that it is very hard to take the ice plate in and out of the sleeve. The Velcro to secure it is inside of the sleeve, so this makes it difficult to easily take the ice plate out to refill or clean. I ended up rigging up 4 Velcro straps that allow me to have the bottom flap on the outside of the sleeve. Now I have super quick access to remove and refill my water. Did the same thing with my friends sleeve.
S
The IMS Pro is a great system for mounting the ice plate. There’s many different ways to mount this and they all stay in place!
S
If your on the fence just do it you will not regret it. This is a great addition to any setup. When you think about it you have cooling or heating capabilities while also having half a days water streamlined into your gear with little or no additional drag. It's a smart and effective way to have your gear multitask without adding bulk.
P
Looking for a way to carry more water directly on my plate carrier and this is perfect. Fits just right on the back of my Crye SPC size M. I’m thinking about swapping places with the back plate and the hydration plate to try the cooling out. I don’t know why it wouldn’t work?
S
I want to say this seems to be a good product, however there are things that could make it better. First the pros;
- Love the design and shape going right along with the plate carrier. So much better than an odd shape water bladder.
- Love the hard, solid shape design over a soft bladder. Seems sturdy and not likely to lead like soft bladders always do.
- Really like the hose fittings and mouth pieces, better than the typical camelbak. Easy to take out the bladder and fill then re-attach.
Now to the cons.
- Low capacity. I wish the bladder was a bit thicker, closer to 1 inch thick so it is on par with the thicker ballistic plates. I wish this for two reasons, first to increase the water capacity and second so the carrier would be able to accommodate the thicker plates so you could switch out the plate and water bladder for the cooling benefit. Currently with my plates they don’t fit in the carrier for the bladder so I cannot use this for the cooling effect.
For what the product is, it is good but if there was some minor changes then it could be great.
Hi Steven,
We’re glad to hear that you're enjoying the design and sturdy build of your IMS Pro Combo! We truly appreciate your feedback.
The ICEPLATE® Curve is indeed 1” thick, matching the profile of the Medium ESAPI armor plate, which, according to Department of Defense data, fits 80% of the general population. We selected this architecture to ensure seamless integration with most plate carrier plate bags that accept a Medium ESAPI, while offering cooling, heating, and hydration benefits to the widest range of users. Based on your review, it sounds like you might be using the IMS Pro externally. While this is possible, it’s not ideal for maximizing ICEPLATE® Curve’s cooling and heating benefits. The IMS Pro’s laser-cut design is intended to provide maximum conductivity when mounted internally, allowing direct ICEPLATE® Curve contact with the wearer’s body for optimal thermoregulation, while keeping your armor plate in your rear plate bag.
For increased hydration capacity, we recommend an external mounting of an additional ICEPLATE® Curve via the IMS, combined with your internal IMS Pro setup. This configuration provides a total of 3 liters of hydration. You can learn more about optimizing your plate carrier with a dual ICEPLATE® setup here:
We hope this helps! Feel free to reach out with any further questions.
#StayFrosty
Qore Performance Customer Support Team
C
Instagram Handle: @artichokemoss
I do kinda wish I bought the 15$ knock-off ice pack & sewed a molle carrier since I have the equipment & a background both in engineering & tailoring. I expected more. It gets 4 stars since I suspect it's more durable than the chinesium I could put in a diy carrier but that remains to be seen.
Hi C,
Thank you for sharing your experience with the IMS Combo. We appreciate your honest feedback and value your perspective.
To address your points, it's important to note that you're investing in more than just R&D. Our IMS Combo is 100% made in the USA from American materials, designed for performance-minded end-users with durability and guaranteed by our Forever Warranty for hard duty use. Supporting American-made goods keeps American dollars within our economy, supporting local businesses, labor, and manufacturing. We prioritize quality assurance and our company values, choosing not to outsource duty-rated goods to foreign manufacturers. This ensures that our products are reliable and consistent.
Our ICEPLATE® itself exemplifies this commitment to quality, being an FDA-approved, BPA-free water bottle. This provides a level of safety and assurance that is often lacking in products made in the People's Republic of China, which, while cheaper and better suited to the commodity-minded consumer, may not meet the same safety standards.
Regarding your expectations, the IMS Combo offers robust hydration with our durable ICEPLATE® hardcell bladder, designed for external mounting on any MOLLE plate carrier. For those seeking additional features, our IMS Pro Combo and IMS Versa Combo provide internal mounting to leverage ICEPLATE® Curve's capability for powerful cooling or heating when worn against the body, along with the same durable hydration.
For a detailed comparison of the IMS, IMS Versa, and IMS Pro options, please refer to this INSIGHTS article: https://www.qoreperformance.com/blogs/military-insights/what-is-the-difference-between-ims-and-ims-pro-iceplate-molle-sleeve-vs-iceplate-molle-sleeve-pro We hope this information is helpful. If you have any further questions, please don't hesitate to reach out.
#StayFrosty
Qore Performance Customer Support Team
N
I used the iceplate with a esstac plate carrier and a lvl 4 steel plate in the rear bag with a lvl 4 ceramic in the front bag. As well as a magazine placard. I used this set up to do the Murph workout on memorial day. I was a bit skeptical how well it would work. Here to say that I was shocked about how the iceplate lessened my fatigue throughout the workout. In my opinion Qore is making super humans with thermal regulation. I'm in the process to get one of there carriers and plate combos
B
Instagram Handle: 111percentEMS
Running a 5.11 TacTec with 11x14 curves, I had to take the route of the IMS Pro Sleeve for my IcePlate. Dilemma was inside vs. outside. Inside and I lose my super comfy vented pads and am forced to purchase additional padding for the long days comfort OR outside and I retain my cushions but lose nearly 4 rows of molle on sides and bottom which is valuable real-estate for my multi-day outings. I opted for the outside method and I stacked my MultiFak onto my admin toolkit as I am multi role medic and wrench/gunsmith. Slightly inconvenient should I need my tools rapidly but as with anything, we adapt to the circumstances.
Mounting is so easy a fireman can do it and the construction is phenomenal. Time will tell how it holds up to rocks and trees but I am fairly confident in Qore Performance Products... #111percentEMS
Reviews in Other Languages
R
Instagram Handle: R_glocker_s
Semplici nel utilizzo, ottimi materiali e ben curati nelle finiture, utilizzati appena arrivati e sono veramente soddisfatto ( montati dietro ai sedili della mia Jeep )
R
Instagram Handle: harzbock18
Schnelle Lieferung, 1A Qualität!!!
a
IcePlate MOLLE Combo: External Hard Cell Hydration for Plate Carriers and Body Armor