*One-Way Valves come standard on all IcePlate Curves shipped after 01JAN 2022.
The world's most capable water bottle just got a power-up.
Introducing the One-Way Valve Retrofit Kit for IcePlate® Curve: a simple, DIY kit that allows you to 3D print your own jig to install the One-Way Valve on your IcePlate® Curve in the convenience of your own home. This kit is for existing IcePlate® Curve owners who do not have One-Way Valves on their IcePlate® Curves. All new IcePlate® Curves, IMS Combos, and IMS Pro Combos come standard with One-Way Valves.
***INSTALLATION OF THE ONE-WAY VALVE WITHOUT THE 3D PRINTED JIG IS NOT RECOMMENDED***
The one-way valve allows air into IcePlate® Curve, improving flow rate by more than 100% for an effortless drinking experience. This option is recommended for anyone using IcePlate® Curve for hydration.
Click. Print. Drill. Drink.
Click here to download our open-source .STL file for the One-Way Valve Installation Jig from Thingiverse.
Each Package Includes:
- 1 x One-Way Valve for IcePlate® Curve
Works as intended. Should have had the valve in the fist model of the ice plate. I had to purchase one to keep install in my first plate.
This little valve was a perfect update for the ice pack. Easy to install and works like a charm.
Just want to say that I am not military, so in no way, shape or form am I putting this product through the intensity levels they may see in that field. With that being said, I do use this in my kit for firearm training at the range, as well as airsoft skirmish and scenarios. The IcePlate Curve has probably seen around 50 hours of use since May 2021. There is only one problem that I have with the IcePlate, and that is with the IceCap/IcePlate Port.
I'm not sure if this is how it is with everyone's, butt I find that if you tighten the IceCap to, what feels like, completely snug, it will "strip" and slip off the grooves, resulting in profuse leaking. However, if you only give it "60%" pressure when tightening, it seems to hold all liquid with no leaks. (At least from my experience.) I may add some PTFE tape to see if I can use that to get a full tighten down without leaking, but besides that - it is an amazing product and well worth the money.
I only use the Sleeve Pro for those extremely hot, humid Florida days, where I will run it on the inside of my plate carrier, frozen to help cool down. Works amazing and is worth it right there alone. Almost want to buy a second one for the front as well, haha. For non-frozen use, I will run the IcePlate in a third-party storage on the rear of the carrier, but the same concept applies. Keeps you cool on those hot days, keeps you hydrated...always. -1 star for the issue with the leak, but again - that could just be my unit or a mistake I had made in the past.
Thank you for taking the time to leave an honest review! We are sorry to hear you have had some issues with your IceCap interface. If you could send a video of the issue to Info [at] Qore Performance [dot] com, we'll see what we can do to get you squared away ASAP. #StayFrosty
Recently I emailed Qore asking if they would sell me a one-way valve for my IcePlate. The email response back was almost immediate and they told me they were actually going to start selling them in just a few days. I purchased and installed the new one-way valve retrofit kit for my IcePlate. It makes a huge difference in the water flow rate. So much better. I highly recommend it. I do not have access to a 3D printer so I did not use the installation jig. I did it freehand, and while not perfect, it turned out just fine. Thanks to all at Qore for the great customer service and great gear!