IceCase iPad Cooling Case Quick Start Instructions, Setup

IceCase iPad Cooling Case Quick Start Instructions, Setup

Setup Instructions for IceCase iPad Cooling Case by Qore Performance®

IceCase for iPad 10.2
1. What is in the box?
IceCase iPad Cooling Case what's in the box
2. Separate Dual Lock Velcro for assembly (Pic of dual lock and platform)
3. Remove adhesive and apply Dual Lock to each platform
Dual Lock installed on Side Platforms for IceCase iPad Cooling Case
4. Install Platforms into SpeedSlots
Installing side platform for IceCase iPad Cooling Case
5. Remove adhesive and apply Dual lock to SunShield feet
IceCase iPad Cooling Case Sun Shield Feet dual lock install
Place dual lock on sun shield
Then install Strap Loops into SpeedSlots
Install strap loops into SpeedSlots for IceCase iPad Cooling Case
Install strap loops into SpeedSlots for IceCase iPad Cooling Case
6. Install iPad
Install IceCase foam into IceCase iPad Cooling Case
IceCase foam install
7. Attach SunShield to Platforms
Attach IceCase SunShield to Platforms
8. Attach strap kit to Strap Loops
Connecting SwiftClip Strap Kit to IceCase Strap Loops
Attach SwiftClip Straps to Strap Loops on IceCase iPad Cooling Case
9. Install Swift Clips onto Vest/Backpack
IceVest HiVis Class 2 SwiftClip install for IceCase iPad Cooling Case
IceVest HiVis Class 2 SwiftClip install for IceCase iPad Cooling Case
IceVest HiVis Class 2 SwiftClip install for IceCase iPad Cooling Case
IceVest HiVis Class 2 SwiftClip install for IceCase iPad Cooling Case
10. Attach IceCase
IceVest HiVis Class 2 SwiftClip install for IceCase iPad Cooling Case
IceVest HiVis Class 2 SwiftClip install for IceCase iPad Cooling Case
IceVest HiVis Class 2 SwiftClip install for IceCase iPad Cooling Case
IceCase iPad Cooling Case connected to IceVest HiVis Class 2 via SwiftClip
IceCase for iPad Mini
1. Picture of parts on table
 What's in the box IceCase iPad Cooling Case for iPad Mini
2. Install iPad into Mini foam and set aside (pic sliding in, then pic fully installed)
IceCase iPad Cooling Case for iPad Mini foam install
3. Separate Dual Lock Velcro for assembly (Pic of dual lock and platform)
Dual Lock assembly for IceCase iPad Cooling Case
4. Remove adhesive and apply Dual Lock to each platform
Dual Lock assembly for IceCase iPad Cooling Case
5. Install Platforms into SpeedSlots (picture of them installed)
Dual Lock assembly for IceCase iPad Cooling Case
6. Remove adhesive and apply Dual lock to SunShield feet (pic)
Dual Lock assembly for IceCase iPad Cooling Case
Dual Lock assembly for IceCase iPad Cooling Case
7. Install Strap Loops into SpeedSlots
Install strap loops into SpeedSlots for IceCase iPad Cooling Case
Install strap loops into SpeedSlots for IceCase iPad Cooling Case
8. Install foam plus iPad
install iPad Mini foam into IceCase iPad Cooling Case
9. Attach SunShield to Platforms
SunShield install for IceCase iPad Cooling Case for iPad Mini
10. Attach strap kit to Strap Loops
Attach SwiftClip Straps to Strap Loops on IceCase iPad Cooling Case
Attach SwiftClip Straps to Strap Loops on IceCase iPad Cooling Case
11. Install Swift Clips onto Vest/Backpack
Installing SwiftClips onto IceVest HiVis Class 2 Cooling/Heating Safety Vest
Installing SwiftClips onto IceVest HiVis Class 2 Cooling/Heating Safety Vest
Installing SwiftClips onto IceVest HiVis Class 2 Cooling/Heating Safety Vest
Installing SwiftClips onto IceVest HiVis Class 2 Cooling/Heating Safety Vest
12. Attach IceCase
Attaching IceCase iPad Cooling Case to IceVest HiVis Class 2 Cooling/Heating/Hydration Safety Vest
Attaching IceCase iPad Cooling Case to IceVest HiVis Class 2 Cooling/Heating/Hydration Safety Vest
Attaching IceCase iPad Cooling Case to IceVest HiVis Class 2 Cooling/Heating/Hydration Safety Vest
Attaching IceCase iPad Cooling Case to IceVest HiVis Class 2 Cooling/Heating/Hydration Safety Vest
IceCase for iPad 9.7
1. Picture of parts on table
IceCase iPad Cooling Case for iPad 9.7 What's in the box
2. Install iPad into Mini foam and set aside (pic sliding in, then pic fully installed)
IceCase iPad Cooling Case for iPad 9.7 insulation foam install
3. Separate Dual Lock Velcro for assembly (Pic of dual lock and platform)
Dual Lock install on IceCase iPad Cooling Case for iPad 9.7
4. Remove adhesive and apply Dual Lock to each platform
Dual Lock install on IceCase iPad Cooling Case for iPad 9.7
5. Install Platforms into SpeedSlots (picture of them installed)
Dual Lock install on IceCase iPad Cooling Case for iPad 9.7
6. Remove adhesive and apply Dual lock to SunShield feet
SunShield Dual Lock install on IceCase iPad Cooling Case for iPad 9.7
SunShield Dual Lock install on IceCase iPad Cooling Case for iPad 9.7
7. Install Strap Loops into SpeedSlots
Strap Loop install into Speed Slots for IceCase iPad Cooling Case for iPad 9.7
Strap Loop install into Speed Slots for IceCase iPad Cooling Case for iPad 9.7
8. Install foam plus iPad
iPad install into IceCase iPad Cooling Case for iPad 9.7
9. Attach SunShield to Platforms
SunShield install for IceCase iPad Cooling Case for iPad 9.7
10. Attach strap kit to Strap Loops
Attach Strap Kit to Strap Loops on IceCase iPad Cooling Case
Attach Strap Kit to Strap Loops on IceCase iPad Cooling Case
11. Install Swift Clips onto Vest/Backpack
Installing SwiftClips onto IceVest HiVis Class 2 Safety Vest with Cooling/Heating/Hydration
Installing SwiftClips onto IceVest HiVis Class 2 Safety Vest with Cooling/Heating/Hydration
Installing SwiftClips onto IceVest HiVis Class 2 Safety Vest with Cooling/Heating/Hydration
Installing SwiftClips onto IceVest HiVis Class 2 Safety Vest with Cooling/Heating/Hydration
12. Attach IceCase
Attaching IceCase iPad Cooling Case to IceVest HiVis Class 2 Safety Vest with Cooling/Heating/Hydration for hands-free carry
Attaching IceCase iPad Cooling Case to IceVest HiVis Class 2 Safety Vest with Cooling/Heating/Hydration for hands-free carry
Attaching IceCase iPad Cooling Case to IceVest HiVis Class 2 Safety Vest with Cooling/Heating/Hydration for hands-free carry
Attaching IceCase iPad Cooling Case to IceVest HiVis Class 2 Safety Vest with Cooling/Heating/Hydration for hands-free carry

2 comments


  • Qore Performance

    Hi Michelle,
    Right now, Apple will only let us distribute the StayFrosty App to select enterprise customers. While they (Apple) are restricting distribution, please email us and we’ll see if we can get you setup: Info [at] Qore Performance [dot] com – thanks and talk to you soon!


  • Michelle

    Hi, my boss received the ice packs this week and I’m having trouble downloading the Stayfrost app. Is there a set on instructions on how to get the app or is there a step I’m missing?


Leave a comment

Please note, comments must be approved before they are published

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.