Designed and manufactured in the USA.
Each Package Contains:
|Year Round Cooling/Warming Solution||Fill and freeze IcePlate Curve for an unparalleled 70 Watts of Cooling Power per plate, keeping your core body temperature where you want it for hours. As the ice melts, you will have ice cold water to drink. Fill with hot water and enjoy the conductive heating effect.|
|Multi-Curve Geometry||Conforms precisely to the geometry of the Medium ESAPI armor plate. This first of its kind architecture provides the most comfortable cooling/heating/hydration system ever conceived.|
|Easy to Fill + Maximized Water Use||A single recessed port at the lowest point of the bottle, facilitates complete drainage and an effortless fill, each and every time. Proprietary TotalDrain Technology lets you finally drink all the water you are carrying, meaning no wasted weight.|
|Q-Hex Baffle System||Maintains IcePlate Curve's structure during the freezing process, preserving the low-profile geometry, and decreasing audible sound in the field.|
|IceCap||IceCap allows IcePlate Curve to be stored with or without a hose for maximum storage efficiency. Features a universal Quick Disconnect interface that integrates seamlessly with most military and civilian drink hoses, allowing IcePlate Curve to go from freezer to field in seconds. New, low-profile 90º elbow in black eliminates hose kink and is included with both 36" Drink Hoses.|
|Side-Release Adjustable Armor Straps||Ensure IcePlate Curve can work with any plate carrier in the world between combat shirt and plate carrier. For users who want to run IcePlate Curve in their plate bag, the exact fit will depend on the specific plate carrier/armor combo.|
|Easy to Clean||IcePlate Curve is a breeze to clean - just pop it in the dishwasher or rinse with dish soap and hot water.|
- Dimensions: 9.5" by 12.5" by 1"
- Weight: About 12 oz.
- Capacity: 50 oz (1.5 L)
- Cooling Duration: Lasts 2-4 hours (after freezing overnight for 6-8 hours)
- Heating Duration: Lasts 3-5 hours filled with hot water between 150-190 F (temperature based on personal preference/safety and outside temperature)
- BPA-free, FDA Approved, Dishwasher Safe Thermopolymer
- Multiple US and International Patents Pending
- Made in USA
- Cold Drink Ingestion Improves Exercise Endurance Capacity in the Heat
- Carolina Fire Rescue EMS Journal: IcePlate as a Fire/EMS rehab tool
- AHA: Fire Simulation and Cardiovascular Health in Firefighters (Improve firefighter health & safety with Active Cooling)
- USSOCOM White Paper is available for official USG requests from agency email accounts only, please email us with your Unit/Agency/Department in the Subject line from your official email account (personal email addresses will not be processed) and a Qore Performance representative will respond to you within 24 hours with the White Paper.
Bulk Unit/Agency/Corporate Orders: For 100 units or more, please email us with your Unit/Agency/Company in the Subject line from your official email account (personal email addresses will not be processed) and a representative will contact you within 24 hours.
Solid! Better than a normal outside bladder and an upgrade from the source internal bladder.
I first ordered my coyote IcePlate with a Source tube and bite valve because they are the best. This ended up being a poor decision on my end, because the Source tube lacks a 90 degree connector, which in my view is necessary with an IcePlate. I felt like I was constantly adjusting the tube at the IceCap, and then eventually at some point when I was adjusting the tube, the IceCap popped off the threads and sent water pouring out of the IcePlate and all over my legs. After this happened the first time, the IceCap seemed to pop off every time I tried to adjust the Source tube.
I contacted Doug at Qore and he had me send everything back in, and in a matter of days I had a brand new replacement IcePlate, as well as their bite valve with the 90 degree elbow. I mentioned to Doug that this was such an issue for me that I’m surprised that Source tubes were being sold with the IcePlate, and now I see that the Source tubes have been completely removed from being sold with the IcePlate, so that’s probably a good thing.
I was a little bummed, though, that I had to give up the Source tube. So I ordered one on Amazon to do a little experiment. I easily had pulled out the 90 degree elbow from the new drink hose, so I thought maybe I could do the same with the Source tube. When I got the Source tube, I put it in my vice and pulled on the connector as hard as I could, and the only thing that happened is I separated the tube cover from the end, which revealed that its connector is heat sealed into the tube. I figured I’d roll the dice and proceeded to cut the connector off, and then, luckily, the 90 degree connector slid right in, and its ridges kept it snug in place.
Now I have a Source tube and bite valve with 90 degree connector on my IcePlate setup, and it couldn’t be more perfect. I have zero kink issues, and I get to enjoy all the perks of having a Source tube. Now I can stay cool, stay hydrated, and refill my IcePlate with water bottles without doffing my carrier.
I’ve been a fan of the ice plate since the very beginning. The improvements and updates made to the Curve are amazing! It fits perfectly in a plate carrier or my backpack for travel. I seriously take this with me on all my trips! 10/10 will recommend this to anyone looking for a hydration carrier.
I've used my plate for a few weekend-long airsoft games and it's been a lot more comfortable than the 1.5L hydro bladder I was using. My gear is more balanced, and not needing a pouch for a bladder opens up a lot more real estate on my plate carrier. Being able to use my other Source hoses is a plus. Looking forward to using this for some hiking and photography trips coming up too, but so far so good!
A truly spectacular design and invention. Stays cold especially for the hot range days. Love it!